Specifications
| Temperature/Humidity | Operating = -15°C to +60°C, 0-100% RH Storage = -30°C to +70°C, 0-100% RH Extended temperature models (low and high) upon request |
| Enclosure Rating | Both Al and SS models rated NEMA/UL 4/4X, IP66 Al Housing: Proprietary alloy, copper free die cast aluminum housing with powder coat finish SS Housing: Stainless Steel |
| Switch Rating | Mechanical Life = 10 x 10^6 cycles (typical) Resistive Load = 230 V AC/6A continuous/10A momentary, 24V DC/6A continuous/10A momentary Inductive Load = 230V AC/Power factor 0.7/3A, 125V DC/0.5A, 80V DC/0.75A, 40V DC/1A, 24V DC/3A Motor Load = 230V AC/Power factor 0.85/10A Temperature = -40°C to +85°CNOTE: Special 115 VDC/10A rated switches now available! Contact Micronor Sensors sales for more information. |
| Cam Programming | Fully programmable double cams = type NK4201.180 1-2 (COM-NC) = Cam valley profile, 4°…180° (1…50%) 1-3 (COM-NO) = Cam valley profile, 4°…356° (1…99%) Repeatability= 1.8° |
| Mechanical Rating | Max RPM = 1500 rpm Mechanical Life = 10 x 10^6 cycles (typical) Max Radial (Side) Shaft Load = 80N (18 lbf) Max Axial (Thrust) Shaft Load = 40N (9 lbf) |
| MR265 4-20mA Position Transducer Output OPTION | Programmable Output = 4-20mA, (Offset and Span trimpots) Power = Loop-Powered, Internal Potentiometer Feedback, 18-30V DC Current Consumption = 4-20mA Power Consumption = 400mW (maximum) External Burden Resistance = 1kΩ (maximum with 24V or higher) Linearity = +/- 0.5%, Temperature Dependence = 100ppm/°C (maximum) Operating Temperature Range = 0-70°C |
| Wire Range | 24-10 AWG, 0.25mm^2 to 185mm^2 Phoenix MKDS 5/3-6.35 COMBICON modular wiring blocks with screw connection Other wiring block options on request |
Ordering Information
| MR221-Lw-Mx-y-z MR222-Lw-Mx-y-z
Example: |
MR221 for one-ended shaft model MR222 for two-ended shaft modelLw where w equals the number of cam switch channels, usually 2 or 4 or 6 or 8 channels
Mx or Ux where x equals the gear ratio, standard range is 1:1 to 2500:1, special ratios on request y housing option where y=(blank) for Standard Die Cast Aluminum Housing, y=X for Optional Stainless Steel Housing z represents the MR265 4-20mA output option, where z=(blank) for none and z=1 for Optional 4-20mA output option |
MR221 MR222
IP66 Heavy Duty Geared Limit Switch
MR221/MR222 series CE-approved Heavy Duty Geared Limit Switches are for use in the most demanding industrial applications – including cranes, hoists, presses, packers, machine tools, handling devices and other similar operations where motion is expressed in shaft rotation.
- MR221 for single-ended shaft applications
- MR222 series where double-ended shaft is required
- NEMA/UL Type 1/4/4X/IP66 rated enclosures – choice of die cast aluminum or stainless steel
- Shafts are standard 1/2″ OD with #404 Woodruff key (included)
- Choose 2, 4, 6, or 8 cam switch channels
- Gear ratios from 1:1 to 2500:1
- Conduit hubs included for 1/2″ NPT
- Special configurations on request
TO ORDER
Call +1-805-389-6600 or email sales@micronor.com
