EOF0049 KF40 Vacuum Feedthrough Flange

Single-FT_01

EOF0049

KF40 Flange-Type Optical Feedthrough

This optical feedthrough was specifically designed for installation on the KF40 port of a vacuum chamber.  The device provides a hermetic interface and requires no maintenance.

On both sides there are standard ST plugs with an internal fiber feedthrough stub forming the hermetic barrier between the two sides. There are no moving parts or loose optical cables. It is best combined with an internally mounted TS2 or TS3 probe with external connection via a DIST-CXXX fiber optic extension cable to the input of a FOTEMP or Insulogix series signal conditioner. An MR320A ST Bulkhead Adapter is required on each port to facilitate connection of either a TS sensor or DIST-CXXX extension cable. 

Specifications

No. of Channels One channel=order EOF0050; Two channels=order EOF0049
Temperature range -40 °C to + 120 °C
Vacuum rating TBD
Flange size KF40
Connector type ST
Probes Compatible with all Weidmann TS-series fiber optic temperature probes.

Specifications subject to change without notice

Ordering Information

EOF0008 ST-to-ST Hermetic Feedthrough for Pressurized and Vacuum Vessel Applications, 1/4″-NPT Threads
EOF0050 Single Channel ST-to-ST Hermetic Feedthrough for Pressurized and Vacuum Vessel Applications, KF40 Vacuum Flange
EOF0049 Dual Channel ST-to-ST Hermetic Feedthrough for Pressurized and Vacuum Vessel Applications, KF40 Vacuum Flange
DIST-CXXX Fiber Optic Extension Cables for external connection from Feedthrough to FOTEMP Signal Condition input. Includes one MR320A ST bulkhead for connection to a TS sensor or KF40 port. Consult data sheet for cable types and length options.
MR320A ST-to-ST Bulkhead Adapter

Features

  • No moving parts
  • Support vacuum or pressure
  • No epoxy or O-ring

Downloads

Datasheet

TO ORDER

Call +1-805-389-6600 or email sales@micronor.com