Products: Cam Timers

Cam timers are used in a variety of industrial automation and process control applications. They are simple to use. Easy to set-up. No computers required. No software to write. Easy to maintain. Never obsolete. Cam timers and incremental itches are the simplest solution for smaller-scale automation tasks. For time-dependent control processes, they represent a low-cost alternative, between relay-control and microprocessor/PLC based solutions. Typical lead time is 2-3 weeks ARO (expediting available). Options include:

NEB series is most popular cam timer

1 to 21 switch channels

Mounting options include DIN rail, front panel and chassis mount

Timing cycle options from 5 seconds to 24 hours

Motor options: AC (24, 48, 110 or 220V) DC (12 or 24V)

Choice of single, double or clip-programmable cams

MR265 OPTION provides 4-20mA position feedback

MR267 OPTION allows PLC remote control via 4-20mA input

PRSG OPTION features adjustable speed range and quick stopping

Contact Dennis Horwitz at Micronor Inc. at (805) 499-0114 to discuss your special motor pot/cam timer requirements

HS \| Front panel-mount cam switch control
	HS series are manual programmed cam switches designed for front panel mounting. Standard features include: Choice of NP series clip-programmable cams with 5 or 6 degree spacing Choice of 2-15 single-sided or 4-30 double-sided switch channels
	Downloads: datasheet \| manual \| drawing \| image \| \|

KW60 \| Open Frame Limit Switches
	KW series are open frame for mounting in customer's enclosure: Full range of gear ratios Choice of 1-12 single-sided or 2-24 double-sided switch channels Custom versions are available as replacements for obsolete cam timers and rotary limit switches by Crouzet, Kraus & Naimer, etc.
	Downloads: datasheet \| manual \| drawing \| image \| \|

MSB \| Step-By-Step Single-Cam Timer
	MSB series cam timers are for very simple step-by-step timer control applications. Versus the NEB series with fully programmable (variable pulse width) double cams, this model is provided only with single cams. Standard features include: NK4101.20 single cam or OPTIONAL NP (5 or 6 degree spacing) clip-programmable cams 2-21 switch channels Choice of AC (24, 48, 110 or 220V) or DC (12 or 24V) motors
	Downloads: datasheet \| manual \| drawing \| image \| \|

NEB \| Fully Programmable Cam Timer
	NEB series cam timers are the industrial standard, high reliability control timer solution which Micronor has been supplying to industry for the past 40 years. Standard features include: NK4201.180 fully programmable double cams 2-21 switch channels Choice of AC (24, 48, 110 or 220V) or DC (12 or 24V) motors Easy programming with optional QS (orange) cam programming key
	Downloads: datasheet \| manual \| drawing \| image \| \|

NK NP NV Series \| Cam Options
	These cams are the most common options offered on Micronor motorized potentiometers, cam timers and rotary limit switches: NK series are DEFAULT Standand on all Micronor products NP series OPTION use removeable clips to program multiple On-Off cycles NV cams OPTION feature an internal worm gear for fine and precise adjustments. This is the default cam for all Micron replacement feedback units.
	Downloads: datasheet \| manual \| drawing \| image \| \|